Installation Instructions:

1. Shut off the water supply to the bath.
2. Remove the old bath filler and make sure the area is clean and dry.
3. Insert the new bath filler into the mounting holes on the bath.
4. Tighten the fixing screws from underneath the bath using a screwdriver.
5. Connect the hot and cold water supply pipes to the inlet connections on the bath filler.
6. Tighten the nuts with a wrench, making sure they are secure.
7. Turn on the water supply and check for any leaks.
8. Adjust the temperature and flow of the water using the handle on the bath filler.
9. Enjoy your new Toni Bath Filler!

Note: It is recommended that a qualified plumber installs this product. Do not overtighten the fixing screws or inlet connections as this may damage the product. Always turn off the water supply before making any adjustments or repairs.

Dimensions: H 127 x D 155 x W 180mm

High Pressure Deck Mounted Chrome Bath Filler

Minimum Recommended Operating Pressure: 1.5 bar

This product is a replacement for (DITB1044) Sebatta Bath Filler – Chrome which is now discontinued

Comes with a 3 year guarantee on valves and a 5 year guarantee on body and finish

Manufacturers Guarantee: 3 years on valve 5 years on body and finish